PhotonTek XT 1000W CO2 Pro LED Grow Light

PhotonTek’s experts have designed and engineered the most powerful grow light they’ve produced so far. The PhotonTek XT 1000W CO2 Pro LED Grow Light delivers the perfect balance of quality and quantity for brilliantly high quality light combined with ultra-high PPFD levels to help your plants grow healthy and potent. Designed for a 5’x5’ space with use of CO2 supplement for maximum performance, the XT 1000W gives indoor growers and gardeners the ability to give a huge boost to your harvest yields without needing to increase space.

The PhotonTek XT 1000W PRO LED Grow Light is manufactured using only the highest-grade materials and components. PhotonTek’s experts have combined the best high quality, full spectrum light with the highest intensity PPFD to be delivered through a multi-bar, linear design. The PhotonTek XT 1000W Pro delivers the highest quality light for your plant’s entire growth cycle, making these LEDs the smartest option for healthy, potent harvests a faster return on investment.

PhotonTek XT 1000W CO2 Pro Product Documents

XT 1000W CO2 Pro Spec Sheet
XT 1000W CO2 Pro Instructions Manual
XT 1000W CO2 Pro Certificates & Technical Reports

PhotonTek XT Features

The PhotonTek XT 1000W PRO LED Grow Light delivers stunning levels of PPF output (2925 µmol/s) and a photon efficacy (fixture efficiency) of 2.9 µmol/J. Combined with the fixtures smooth, even light spread at close distance from the canopy, you can expect stellar results in a 5’x5’ indoor grow space with supplemental CO2 use.

It’s not necessary to use CO2 with this light, but if you do use CO2, it is recommended that you place the light at a longer distance form the canopy so you get the best PPFD levels possible according to your specific stage of growth. Utilizing this method gets coverage up to 6’ x 6’ but you’ll experience lower levels of PPFD intensity concentration.

Using CO2 to supplement your grow can significantly improve yields if used properly. A good rule of thumb is once you exceed 1000 µmol/s/m2 PPFD levels, you should be 1:1 with CO2 PPM – up to 1500. Using this as a guide, at max PPFD = 1500 µmol/s/m2, CO2 would be 1500 PPM (a little lower, 1400 PPM may be the safest to start).

When compared to regular similar wattage HPS (high pressure sodium) lighting systems, the XT 1000 watt led grow light can lower HVAC needs 30-40% and increased yields up to 30-60%.

The XT 1000W CO2 Pro LED is built using high quality and durable P-TEK drivers and top bin LEDs from Osram and Lumileds Philips to create an optimized, full-spectrum light source that’s perfect for veg and flowering stages and can be dimmed, so you can adjust PPFD levels without losing efficiency.

Increased Output and Less Maintenance

This flexible, low powered, yet efficient LED grow light utilizes ten 100W LED bars resulting in lower temperatures, increased output, and less maintenance.

Operate this flexible fixture in any configuration from a single light bar to the full 10 bar line-up at any intensity by simply adding or removing the desired amount using the fixtures’ innovative click-magnet design. The driver can also be detached from the fixture and used away from the fixture for your convenience.

The XT 1000W CO2 Pro LED grow light can also be externally controlled with a P-TEK Digital Lighting Controller allowing you to control light timing, automated dimming, temperature safety control, sunrise & sunset for up to 100 fixtures per controller.

Universal Control Systems Compatibility

PhotonTek Pro LED Fixtures can be fully controlled with either the PhotonTek Digital Controller or with any other control system that utilizes a 0-10V output signal. Even if your controller has an RJ port interface, you can still run PhotonTek LEDs by using a signal converter RJ to 0-10V control adaptor.

PhotonTek XT 1000W CO2 Pro Spectrum

PhotonTek XT 1000W CO2 Pro Distribution Curve Flux

Key Features

Efficacy: 2.9 µmol/J
PPF: 2925 µmol/s
Input Voltage: 120-277V, 50-60Hz
Driver: 1000W 120V-277V with Twist Lock capability
Input Power (100%): 1005W (277V); 1025W (120V)
Coverage Area: 5’x5’ with Supp. CO2; 6’x6’ without Supp. CO2 used at higher heights.
Waterproof: IP65
Lifetime: 60 000 Hrs
Light Distribution: 120°
Light Source: Higher Spec Osram and Lumileds Philips Diodes
Dimmable: OFF-25%-50%-75%-100% with 0-10V Light Dimmer (Included)
External Control: With Digital Controller
Weight: 39.68 Lbs
Dimensions: 46.50’’x 42.95’’ x 4.16’’
Spectrum: Full Spectrum

Product Highlights

Highest Market Fixture Efficacy 2.9 µmol/J
High PPF output for high intensity 2925 µmol/s
Lowest $/µmol
World Class Diodes & Drivers
Designed to produce utra-high PPFD for CO2 supplemented Grow Areas
CO2 Supplemental: A ratio of 1:1 CO2 PPM should be added once a PPFD of 1000 µmol/s/m2 is exceeded
New Clear Glue Technology on the LED Bars Protection Cover
Optimized Full-Spectrum
Detachable Driver
Fully Dimmable
External Control with Digital Controller
Interchangeable Magnet LED Bars
User Friendly & Easy Set-Up
5 Year Warranty

What's Included

10 x 100W 2.9 Full-Spectrum Magnet LED Bars
1 x 1000W Driver with Connecting Cables
1 x LED Structure with Connecting Cables
1 x Power Cable with NEMA 5-15P 120V Plug (NEMA 6-15P 240V also available)
1 x 0-10V Light Dimmer + Velcro
2 x Metal Cable Hangers
1 x Manual

PhotonTek XT 1000 CO2 Pro Specifications

Veg Footprint	7’ x 7’
Flower Footprint	5' x 5'
Power	1000 watts
Spectrum	Full
Light Output	2925 µmol/s
HID/HPS Equivalent	1000 watts
Dimensions	46.50’’x 42.95’’ x 4.16’’
Weight	39.68 Lbs
Recommended Height	22" (without C02)
Manufacturer's Warranty	5 years

Filters

PhotonTek

PhotonTek XT 1000W CO2 Pro LED Grow Light